Spellbinders Style Dies™ Compatibility
---> Zip’eMate™ by Accucut®
Capabilities
This machine is capable of cutting and embossing any Spellbinders Style Die™.
How-To
To use a Spellbinders Die in the ZEM:
1. Place Spellbinders die on ZEM's platform, blade side up.
2. Place paper over die and cut in the same manner as with Zip’eCuts.
3. After cut, do not remove the die or the paper from the platform, place ZEM's Embossing
Foam over paper and with the
ZEM's Embossing Mat, roll through again to emboss the die-cut.
---> ZAZ™ by Accucut®
Capabilities
This machine is capable of cutting and embossing any Spellbinders Style Die™, except the
larger, Size Four Spellbinders Dies.
How-To
To use a Spellbinders Die in the ZAZ™:
1. Place Spellbinders die on ZAZ™'s platform, blade side up.
2. Place paper over die and cut in the same manner as with Zip’eCuts™.
3. After cut, do not remove the die or the paper from the platform, place ZAZ™'s Embossing
Foam over paper and with the
ZAZ™'s Embossing Mat, roll through again to emboss the die-cut.
---> Sizzix®
Capabilities
Sizzix® manufactures the Sizzix® Adapter™ and the Sizzix® System Converter™ which,
together, allow the cutting of Spellbinders Style Dies™ that are smaller than the Sizzix®
Adapter, which measures 2 3/8” by 2 5/8.” This includes most Spellbinders Fonts and Mystery
Dies. The Sizzix® Adapters are sold in packages of ten and several can be used side by side
to allow for the cutting of larger Spellbinders Style Dies™.
Sizzix® does not manufacture any kind of embossing pad or foam to allow the Spellbinders
Style Dies™ to be embossed in the Sizzix® machine. However, Spellbinders Tan Emboss Pad
can be used in the Sizzix® Machine.
How-To
To cut and emboss a Spellbinders Style Die™ in a Sizzix® Machine:
1. Place the Sizzix® System Converter into the Sizzix® Machine.
2. On the Cutting Pad, place paper to be cut, then the Spellbinders Style Die™, ridges down.
3. Place a Sizzix® Adapter over the Spellbinders Style Die™, then cut as normal.
4. Leave the cut paper in the die. Turn the die over so that the ridges are facing up, place
back on the cutting pad – without
the Sizzix® Adapter.
5. Layer a Tan Emboss Pad over the die.
6. Press in the Sizzix® Machine. Shim with extra pieces of cardstock if needed.
---> Sidekick™ & Tag-a-Long™
Capabilities
The Sizzix® Adapter does allow the cutting of Spellbinders Style Dies™ with the Sidekick™ &
Tag-a-Long™, but this is limited to most Spellbinders Fonts or Mystery Dies, due to the
limiting size of the Sizzix® Adapter.
The Sidekick™ & Tag-a-Long™ do not allow for the embossing of Spellbinders Style Dies™.
How-To
To cut a Spellbinders Style Die™ in a Sidekick™ Machine or a Tag-a-Long™:
1. Place die, ridges up, onto a Sizzix® Adapter.
2. Place paper over die, roll through the Sidekick™ or Tag-a-Long™.
---> QuicKutz Revolution ®
Capabilities
The QuicKutz Revolution® is capable of cutting Spellbinders Style Dies™.
It is not capable of embossing Spellbinders Style Dies™.
How-To
1. Place a Spellbinders Style Die™, die side up on the Revolution tray.
2. Add your cardstock on top of the die.
3. Place your clear plate on top of that as your final Layer.
4. Run through the machine.
---> Big Shot by Ellison Design™
Capabilities
This machine is capable of cutting and embossing any Spellbinders Style Die™.
How-To
To use a Spellbinders Die in the Big Shot:
1. Layer an acrylic mat onto the thick white pad.
2. Place either two Sizzix® Adapters™ or one Spellbinders White Spacer Plate onto the
acrylic mat.
3. Place Spellbinders die on the Spacer Plate, blade side up.
4. Place paper over die.
5. Place another acrylic mat over paper. Roll through the Big Shot.
6. To emboss the die, remove the Spacer Plate.
7. Place Tan Emboss Pad over paper, put acrylic mat on top again and roll through Big Shot
again.
---> Big Kick™
Capabilities
With the Big Kick, you can both cut and emboss Spellbinders Embossing Dies.
How-To
From the bottom up, to cut:
1. Universal platform (thick white mat from sizzix)
2. Clear acrylic mat
3. Spacer plate from Spellbinders
4. Spellbinders Style Die (cutting side up) that would mean the side with the ridges
5. Paper or cardstock
6. Clear acrylic cutting mat
Second Step- to Emboss (from bottom up) :
1. Universal Platform (thick white mat from sizzix)
2. Clear acrylic mat
3. Spellbinders Style die with paper still inside the die
4. Two pieces of tan Spellbinders Polymer
5. Clear acrylic cutting mat
---> Cuttlebug™
Capabilities
With the Cuttlebug, you can both cut and emboss Spellbinders Embossing Dies. Results are
beautiful (see a photo tutorial below)
How-To
Cutting Sandwich - (Stack from bottom up)
1. A plate
2. C plate
3. Spellbinders die face up (rough side up)
4. Paper or cardstock
5. B plate
Run through Cuttlebug machine.
Embossing Spellbinders Dies in the Cuttlebug- (Stack from bottom up)
1. A plate
2. B plate
3. Die face up (with die cut still in die)
4. 3 pieces of cardstock
5. 1 Spellbinders tan polymer mat
6. 2nd B plate
Run through Cuttlebug machine
|
|
